Effects of Multi-Walled Carbon Nanotubes (MWCNTs)

Effects of Multi-Walled one C Nanotubes (MWCNTs)Spectral outline, thermal deportment, XRD and morphology find out in synthesis of ampere-second nanotubes decorated by CysteamineOrA simple and efficient procedure for synthesis of Thiolic Composite with use Oxide Multi Walled Carbon NanotubeOrA simple and efficient procedure for synthesis of composite thiol with use oxide multi walled ascorbic acid nanotube and sulfurOrBehnam Maazinejad, Hamidreza Sadegh, Imran Ali, Ramin Shahryari Ghoshekandi, Vahid AliAbstractIn this paper, the effects of multi-Walled blow nanotubes (MWCNTs) were studied as supports for the synthesis of MWCNT-COOH-Cysteamine nanocomposite. At branch Purification MWCNT in H2SO4 and HNO3, solved and the solution earned ultrasound was to attain the equilibrium temperature to functionalization of carboxylate multi walled carbon nanotubes (MWCNT-COOH). Then utilise Cysteamine hydrochloride and NHS and DMF and EDC and MWCNT-COOH the mixture was refluxing. The prep ared on thiol derivatized nanocomposite were analyzed by roentgen ray Diffraction, Scanning electron microscope, FTIR spectroscopy, Transmission Electron smallscopes (TEM) and Thermogravimetric Analysis (TGA).KeywordsMWCNTs, Carbon nanotubes, Functionalization, Cysteamine, Surface modification, Nanocomposite, Thiol, CNT1. IntroductionNanotechnology is significantly impressive acquirement and Economy in the 21st century 1. Carbon, in different forms, has been long used as the important constituent genuine of solid electrodes as a further too metal electrodes 2. After the first Iijima elucidation of their structures in 1991 3, carbon nanotubes have attracted goodish interdisciplinary interest 4. Carbon nanotubes are promising additives for thermoplastics, due to their superior mechanical, thermal, magnetic and electrical properties 5. To optimize the potential applications of carbon nanotubes, it is essential to modify the carbon nanotubes with functional groups and/or nanoparti cles in order to integrate the carbon nanotubes into desired structures or attach sui tabularise nanostructures to them 6. Carbon nanotubes possess high flexibility, large looking ratios (Normally 1000), unique internal structures, electrical conductivity, high chemical activity, low mass density, high electro active surface area, thermal stability and great mechanical potency 7. CNTs have extraordinary electrical conductivity and heat conductivity and mechanical properties, they are probably the top electron field-emitter possible, and their material properties can accordingly barbel closely the very high levels intrinsic to them 8. Hence, CNTs have received considerable attention for usage in chemical science and environmental remediation 9. CNTs playact an exquisite class of nanomaterials that stepped into the nanomedicine arena not more than a decade behind 10. The two main types of carbon nanotubes are the single-walled carbon nanotubes (SWCNT) and multi-walled carbon nano tubes (MWCNT), until now there are some other rare types such as fullerite, torus, and nanoknot 11.Surface functional groups can modify the surface charge, functionality and reactivity of the surface, and increase the stability, and dispensability of Different materials 12-13. Organic sulfur compounds are wide-spreading in numerous natural products and widely used as multiple artificial chemicals 14. The structure and surface chemistry of organic thin films is a research region related to several interfacial processes, including biological events, lubrication, adhesion, wettability, corrosion, electrochemistry, and microelectronic fabrication. To acquire the optimum performance of a material or device in one of these applications, the organic thin film must be prepared with the right type, concentration, and arrangement of functional handle. Functionalization of carbon nanotubes is fix to be an efficient way of modification processes which in public is divided in two main categor ies noncovalent and covalent. covalent functionalization is an irretrievable process of appendage on the nanotube walls or tips it is based on the formation of a covalent coupling between functional entities and the carbon skeleton of nanotubes. Non-covalent functionalization is based on supramolecular complexation using different adsorption forces, such as van der Waals, hydrogen bonds, electrostatic force and - stacking interactions. 57.15-55-56.Thiols are the maximum reactive nucleophilic reagents among altogether the biological models investigated 16. Thiol group is an delicately ligand because of its strong affinity to various heavy metal ions as a result of Lewis acidbase interactions 17. To various heavy metal ions as a result of Lewis acidbase interactions 3.Thiol Derivatives paperCysteamine an aminothiol, is used to decrease tissue cystine content in patients with nephropathic cystinosis, an autosomal recessive lysosomal storage disorder in which intracellular cystine accu mulates due to impaired redeploy out of lysosomes 18. Cysteamine is a sulfhydryl containing compound which appears to arise from the decarboxylation of cysteine or the breakdown of pantetheine 19.Scheme 1. Is a schematic Cysteamine. 20Scheme 1. CysteamineTable 2 Structure and characteristics of Cysteamine 21Cysteamine () is one of the simplest molecules able to bond with the each atoms surface through its sulfur and nitrogen atoms and a prerequisite for the design of compact monolayers with acceptable properties is a fundamental understanding of the forces captive in the self-assembly process, and the characterization of the film at the molecular level 22.Cysteamine as drug applications that have been noted in the table 3 belowTable 3In this study, we functionalized multi-walled carbon nanotubes with carboxyl group and thiol-derivatized via condensation reaction between carboxylated-MWCNT powders and Cysteamine. Infrared (IR) spectroscopy, XRD, SEM, TEM and TGA were used to characte rize the figurehead of Cysteamine on the MWCNT-COOH surface.2. Experimental Procedures2.1. MaterialsMulti-walled carbon nanotubes (MWCNTs) with Purity 95 %, outer diameter and length and manufacturing system catalytic chemical vapor deposition were purchased from US inquiry Nanomaterials, Inc. Sulfuric acid (97 %, AR grade) and nitric acid (37%, AR grade) were purchased from Sigma-Aldrich. N,N-dimethylformamide (DMF98%), 1-ethyl-(3-3-dimethylaminopropyl) carbodiimide (EDC 97%), N-hydroxysuccinimide (NHS 99%) were purchased from Merck Millipore and Cysteamine hydrochloride (99%) were purchased from sigma Aldrich and used as received unless otherwise stated.2.2 Characterization methods2.2.1 X-ray diffraction (XRD)X-ray diffraction studies were carried out with an X-ray diffractometer (Model No. D8-Advance, Bruker AXS).2.1.2 Fourier transform infrared spectroscopy (FTIR)The functional groups on the MWCNTs surface were determined using Fourier transform infrared FTIR method (VERTE X 70, Brucker). FTIR spectrum of MWCNTS was recorded in the range of 4000 400 using pellets method.2.2.3 Transmission electron microscopy (TEM)The morphologies and sizes of the nano-structures were characterized by transmission electron microscope TEM (PHILIPS EM 208).2.2.4 Thermogravimetric analysis (TGA)Thermogravimetric analysis (TGA) was carried out using a TG Labsys DSC, Setaram.2.2.5 Scanning electron microscope (SEM)The size and morphology of MWCNTs was investigated by high-resolution transmission electron microscopy (VEGA3, TESCAN).2.3 Synthesis methodAt first 1 (1g) was treated with 20% hydrochloric acid for 120 min sonication, to remove impurities such as residual catalysts and amorphous carbons in the phase of synthesis , Then the hear was filtered with Millipore membrane filter 0.22 and washed many successive times with distilled water.2.3.1 Oxidation of MWCNTsMulti-walled carbon nanotubes was synthesized by a formerly reported method 52-53. 0.75 g of native MWCNTs w as added to 180ml mixture of concentrated HNO3 and H2SO4 (13, v/v) and then ultrasonicated for a course of 140 min. then mixture was transferred to a flask equipped with a condenser and was refluxed with drastic shocking at 75 for 6 h. After cooling to Ambient temperature the mixture was filtered with filters paper and siftd solid was washed thoroughly by deionized water until the filtrate pH was close to neutral. The filter sample was then dried in a vacuum oven at 80 oC for 120 min. The sample was abbreviated as MWCNT-COOH.2.3.21 Pavani, K. V., Gayathramma, K., Banerjee, A., Suresh, S. (2013). Phytosynthesis of Silver Nanoparticles Using Extracts of Ipomoea i ndica Flowers. American Journal of Nanomaterials, 1(1), 5-8.2 Garca-Gonzlez, R., Fernndez-La Villa, A., Costa-Garca, A., Fernndez-Abedul, M. T. (2013). Dispersion studies of carboxyl, amine and thiol-functionalized carbon nanotubes for improving the electrochemical behavior of screen printed electrodes. Sensors and Actuato rs B Chemical, 181, 353-360.3 Sanagi, M. M., Hussain, I., Ibrahim, W. A. W., Yahaya, N., Kamaruzaman, S., Abidin, N. N. Z., Ali, I. (2014). Micro extraction of Xenobiotics and Biomolecules from Different Matrices on Nano Structures. Separation Purification Reviews, (just-accepted).4 Sadegh, H., Shahryari-Ghoshekandi, R., Kazemi, M. (2014). Study in synthesis and characterization of carbon nanotubes decorated by magnetic iron oxide nanoparticles. world-wide Nano Letters, 4(4), 129-135.5 Mahmoodi, M., Arjmand, M., Sundararaj, U., Park, S. (2012). The electrical conductivity and electromagnetic interference shielding of injection molded multi-walled carbon nanotube/polystyrene composites. Carbon, 50(4), 1455-1464.6 Zhang, Q., Zhu, M., Zhang, Q., Li, Y., Wang, H. (2009). The formation of magnetite nanoparticles on the sidewalls of multi-walled carbon nanotubes. Composites Science and Technology, 69(5), 633-638.7 Mahmoodian, H., Moradi, O., Shariatzadeh, B. (2014). conjoin chitos an and polyHEMA on carbon nanotubes surfaces Grafting to and Grafting from methods. International journal of biological macromolecules, 63, 92-97.8 Moradi, O., Sadegh, H., Shahryari-Ghoshekandi, R., Norouzi, M. (2014). Application of Carbon Nanotubes in Nanomedicine New Medical Approach for Tomorrow. Handbook of look on Diverse Applications of Nanotechnology in Biomedicine, Chemistry, and Engineering, 90.9 Bahrami, K., Khodaei, M. M., Soheilizad, M. (2009). Direct conversion of thiols to sulfonyl chlorides and sulfonamides. The Journal of organic chemistry, 74(24), 9287-9291.10 Jain, S., Thakare, V. S., Das, M., Godugu, C., Jain, A. K., Mathur, R., Mishra, A. K. (2011). Toxicity of multi-walled carbon nanotubes with end defects critically depends on their functionalization density. Chemical research in toxicology, 24(11), 2028-2039.11 Aqel, A., El-Nour, K. M., Ammar, R. A., Al-Warthan, A. (2012). Carbon nanotubes, science and technology part (I) structure, synthesis and charact erisation. Arabian Journal of Chemistry, 5(1), 1-23.12 Wang, Y., Iqbal, Z., Mitra, S. (2006). Rapidly functionalized, water-dispersed carbon nanotubes at high concentration. Journal of the American Chemical Society, 128(1), 95-99.13 Saleh, T. A., Gupta, V. K. (2013). Covalent and NonCovalent Functionalization of Carbon Nanotubes.Advanced Carbon Materials and Technology, 317-330.14 Vukovi, G. D., Marinkovi, A. D., oli, M., Risti, M. ., Aleksi, R., Peri-Gruji, A. A., Uskokovi, P. S. (2010). Removal of cadmium from aqueous solutions by oxidized and ethylenediamine-functionalized multi-walled carbon nanotubes. Chemical Engineering Journal, 157(1), 238-248.15 Castner, D. G., Hinds, K., Grainger, D. W. (1996). X-ray photoelectron spectroscopy sulfur 2p study of organic thiol and disulfide binding interactions with gold surfaces. Langmuir, 12(21), 5083-5086.16 Holmgren, A., Sengupta, R. (2010). The use of thiols by ribonucleotide reductase. Free Radical Biology and Medicine, 49(11), 1 617-1628.17 Vieira, E. S., Simoni, J. A. (1997). Interaction of cations with SH-modified silica gel thermochemical study through calorimetric titration and remove extent of reaction determination. Journal of Materials Chemistry, 7(11), 2249-2252.18 Gahl, W. A. (2003). Early oral Cysteamine therapy for nephropathic cystinosis. European journal of pediatrics, 162(1), S38-S41.19 Kumierek, K., Bald, E. (2008). Measurement of reduced and total Mercaptamine in urine using liquid chromatography with ultraviolet detection. Biomedical Chromatography, 22(4), 441-445.20 Reid, E. Emmet (1958). Organic Chemistry of Bivalent Sulfur 1. New York Chemical Publishing Company, Inc. pp. 398399.21 Lukashin, B. P., Grebeniuk, A. N. (2000). Comparative study of the radiation-protective effectiveness of low doses of cysteamine, heparin, and naphtizine in experiments on mice. Radiatsionnaia biologiia, radioecologiia / Rossiiskaia akademiia nauk, 41(3), 310-312.22 Bloxham, S., EicherLorka, O., Jakub-nas , R., Niaura, G. (2003). surface assimilation of Cysteamine at Copper Electrodes as Studied by SurfaceEnhanced Raman Spectroscopy. Spectroscopy letters, 36(3), 211-226.23 Dayalu, P., Albin, R. L. (2015). Huntington Disease Pathogenesis and Treatment. Neurologic clinics, 33(1), 101-114.24 Kurlan, R., Evans, R., Wrigley, S., McPartland, S., Bustami, R., Cotter, A. (2015). Tai Chi in Parkinsons disorder A Preliminary Randomized, Controlled, and Rater-Blinded Study. Advances in Parkinsons disease, 4(01), 9.25 Than, N. N., Newsome, P. N. (2015). A concise review of non-alcoholic fatty liver disease. Atherosclerosis. 239(1), 192202.26 Bordon, Y. (2015). Microbiota Gut bacteria cross malaria. Nature Reviews Immunology, 15(1), 1-1.27 Brawer, J.R. et al. (1994) the origin and composition of peroxidase-positive granules in cysteamine-treated astrocytes in culture. Brain Res. 633, 920.52 Wu, T. M., Lin, Y. W. (2006). Doped polyaniline/multi-walled carbon nanotube composites Preparation, characterization and properties. Polymer, 47(10), 3576-3582.53 Xu, J., Yao, P., Li, X., He, F. (2008). Synthesis and characterization of water-soluble and conducting sulfonated polyaniline/ para-phenylenediamine-functionalized multi-walled carbon nanotubes nano-composite. Materials Science and Engineering B, 151(3), 210-219.55 Ansari, R., Ajori, S., Rouhi, S. (2015). Elastic properties and buckling behavior of single-walled carbon nanotubes functionalized with diethyltoluenediamines using molecular dynamics simulations. Superlattices and Microstructures, 77, 54-63.56 Bie, B. X., Han, J. H., Lu, L., Zhou, X. M., Qi, M. L., Zhang, Z., Luo, S. N. (2015). Dynamic fracture of carbon nanotube/epoxy composites under high strain-rate loading. Composites Part A Applied Science and Manufacturing, 68, 282-288.57 Shi, Q., Yang, D., Su, Y., Li, J., Jiang, Z., Jiang, Y., Yuan, W. (2007). Covalent functionalization of multi-walled carbon nanotubes by lipase. Journal of Nanoparticle Research, 9(6), 1205-1210.1 Raw Carbon nanotubes( pure carbon nanotubes p-MWCNT)